Zodiac 3000WD

2WD Robotic Pool Cleaner with Easy Lift System

2WD Robotic Pool Cleaner with Easy Lift System.

Find a Dealer

2WD Robotic Pool Cleaner with a new Easy Lift System.

The new Zodiac 3000WD provides exceptional 2WD cleaning performance. This cleaner seamlessly integrates bold styling and advanced engineering, making it a smarter, faster way to clean your pool. The 3000WD cleans all pool surface types and scrubs the floor, steps, walls, and tile line with a pleated scrubbing brush in as little as 1.5 hours.

The 3000WD cleans pools up to 50' (15m) in length. It includes a premium, compact transport caddy that can be assembled in just minutes without using any tools. Model is backed by a 2 year limited warranty.

Features:

  • Easy Lift System - One touch drives cleaner to surface. Water automatically evacuates for easy removal.
  • Easy Clean Filter Canister - debris can easily be emptied with a simple shake and spray convenience.
  • Premium, Compact Transport Caddy - Assembles in minutes without tools and easy to roll.
  • Comprehensive Cleaning - Dual Cleaning Cycles - Select from floor only or floor & wall cleaning mode.

Specifications

Feature Description
Easy Lift System
 Yes
Easy Clean Filter Canister
 Yes
Vortex Vacuum Technology
 Yes
ActivMotion Sensor®
 Yes
Remote Control No
Cleaning Cycle
 Dual Mode Cleaning 1.5 & 2.5 Hours
Cleaning Modes
 Floor, Floor/Wall
Dirty Canister Indicator
 No
Drive
 2WD
Rear Water Cleaning Stream
 Yes
Brush Pleated
Cable Length 60' Cable / 50' Pool
Premium Caddy Yes

Models

Model Description
WR000004 Zodiac 3000WD 2-wheel drive Robotic Cleaner

Exploded Parts Diagram

Automatic Pool Cleaners

Zodiac 3000WD Parts List

Launch our online catalog viewer to review breakout diagrams and part numbers.

Learn More

Frequently Asked Questions

Click a frequently asked question below to see the answer.

Cable is tangling in the pool.
1. Do not unravel the entire cable length. Place only the required length of cable in the water and place the rest on the side of the pool. Follow the procedure in Cord Tangling section of the owner's manual to avoid and correct tangled cord.
On startup the cleaner does not move.
1. The outlet, the control unit is connected to, is not supplying electrical power. Check that the outlet to which the control unit is connected is receiving electricity. 2. Check that you have started one (1) of the two (2) programs and check that the indicator for the selected program is lit. If the indicator light is not lit, turn the wheels then disconnect the control unit and wait at least 20 seconds before reconnecting. If the problem persists, contact Zodiac Technical Support at 1-800-822-7933.
The cleaner does not stay firmly on the pool bottom.
1. Submerge the cleaner following the procedure in Submerging the Cleaner section of the owner's manual. 2. Clean the filter canister, see Cleaning the Filter Canister section of the owner's manual.
The cleaner is not cleaning effectively.
1. Replace the brushes following the procedure in Replacing the Brushes section of the owner's manual. 2. Clean the filter canister following the procedure in Cleaning the Filter Canister section of the owner's manual. 3. Make sure the floating cable is spread out over the pool. Ensure the cable is not too tightly wrapped or coiled when storing. If the problem persists, lay the cable straight in the sun to relax it and remove kinks.
The cleaner does not or no longer climbs the pool sides.
1. Clean the filter canister, see Cleaning the Filter Canister section of the owner's manual. 2. Do a shock chlorination treatment and slightly reduce the pH. DO NOT leave the cleaner in the pool during this treatment.
The flashing indicator lights (3000 WD) or error code on the display (3010 WD and 3510 WD) appear just after start (either pressing Power or Cycle button for less than 20 seconds).
1. Unplug floating cable from the control unit and reconnect. 2. Remove cleaner from the pool and re-submerge. 3. Press power button OFF, then Cycle I or Cycle II to begin a new cycle. 4. Contact Zodiac Technical Support at 1-800-822-7933.
The flashing lights appear during the cleaning cycle.
1. Remove cleaner from the pool and re-submerge, see Submerging the Cleaner section of the owner's manual.

Resources

Zodiac Robotic Pool Cleaners Brochure

Item #: SL4513
File Size: 7414022
Description: CANADA ONLY

Download View Online

3000WD, 3010WD & 3510WD Owner's Manual

Item #: H0401700
File Size: 15204730
Description: CANADA ONLY. Languages/Langues: EN/FR

Download View Online